MEASUREMENT METHODS
Light resistance DIN EN ISO 4892
Pencil hardness DIN EN ISO 15184
Burning behavior DIN 75200 and FMVSS 302
Chemical resistance ISO 2812
Density ISO 3675
Elongation EN ISO 6860
Flash point ASTM D92 and DIN EN ISO 2592
FTIR-Spectroskopie
Cross cut DIN EN ISO 2409
Gloss grade DIN 67530
Ash content DIN EN ISO 1172
Humidity test DIN EN ISO 6270-2
Sulfur dioxide corrosion test -Kesternichtest DIN 50018 and DIN EN ISO 6988
Salt spray test DIN EN ISO 9227
Dry film thickness DIN 2360 and ISO 2808
Shore A and D Hardness, micro IRHD DIN 53505, DIN ISO 48, DIN ISO 7619
Gravelometer-Chip resistance test ASTM D3170/ SAE J400/ GMW 14700 und Fiat 50488
Chip resistance test DIN EN ISO 20567, FORD FLTM BI 157-06, RENAULT D24 1702, PSA D24 1312
Technical cleanliness VDA 19 part 2 and ISO 16232
Climate test SAE J2334/ VW P1210 and VDA 621415
Corrosion test DIN 51360-2
Basic oil content DIN 51368
Pour Point ASTM D97 and DIN ISO 3016
Cleanliness of liquids ISO 4406
Garvimetric determination ISO 4405
Foam test ASTM D892/ ASTM D6082 and ISO 6247
Viscosity DIN EN ISO 3104 and DIN 51562-1
Water content according to Karl Fischer DIN 51777-1/ DIN 51777-2 and DIN EN ISO 12937
Settable substances DIN 38409-H9-2
Biochemical / biological oxygen demand (BSB5) DIN EN 1899-2
Chemical Oxygen Demand (COD) DIN ISO 15705
Legionella, coliforms, E. coli, total colony count at 22 ° C and 36 ° C
Wash out resistance test SAE J2260, VW-TL 52719, VW-TL52712, BMW PR 563
ID cards, plastic cards ISO 7810
Chemical resistance ISO 2812
Air separation capacity DIN ISO 9120
Neutralization number DIN 51558
Laser diffraction ISO 13320 - dust analysis wet or dry
Alternating climate test DIN EN ISO 11997-1
Flexural and impact bending - DIN 53435
