CHEMICAL RESISTANCE
DIN EN ISO 2812 / ISO 16750-5 und IEC 60068-2
DIN EN ISO 2812, coating materials
Part 1: Immersion in liquids other than water
Part 2: Procedure with immersion in water
Part 3: Procedure with absorbent material
Part 4: Drip / stain method
Part 5: Procedure with the gradient oven
DIN EN ISO 2812-1: A coated sample plate is loaded by immersion in a test substance. The effects of the claims are assessed according to agreed criteria.
DIN EN ISO 2812-2: A coated sample plate is submerged in water and the effects of diving exposure are assessed according to criteria previously agreed between the parties. These criteria are generally subjective.
DIN EN ISO 2812-3: A coated sample plate is loaded with one or more test substances using an absorbent material. The effects of the claims are assessed according to agreed criteria. Lay the sample plate horizontally. Dip the filter paper or cotton ball in liquid test substances into one of the test liquids and wait until they are well soaked. After removal, drain excess liquid. Do not squeeze the filter paper or cotton ball. Place the filter paper or cotton bush on the sample plate.
DIN EN ISO 2812-4: A coated sample plate is loaded with a test substance by dripping and staining according to a specified procedure. The effects of the claims are assessed according to agreed criteria.
DIN EN ISO 2812-5: A test substance is added to a coated sample plate according to a specified procedure. The sample plate is loaded in a gradient oven. The effects of the claims are assessed according to agreed criteria.
JDQ 53.3
JDQ 53.3
Environmental Design and Testing of Electronic/Electrical Components and Assemblies
Level 1, Level 2 und Level 3.
Engine Oil
Transmission Oil
Rear Axle Oil
Power Steering Fluid
Brake Fluid
Axle Grease
Washer Solvent
Gasoline
Diesel Fuel
Fuel Additives
Isopropyl Alcohol
Anti Freeze Ethylene Glycol
Degreasers
Detergents
Battery Acid
Salt Water
Waxes
Kerosene
Paint
Paint Thinner
Ether
Bleach Solution
Cola
Coffee
Dust Control Agents (Magnesium Chloride)
Moisture Control Agents (Calcium Chloride)
Vinyl Plasticizers
Undercoating Material
Muriatic Acid
Fertilizers - 28% Nitrogen
Insect Repellent: w/ Deet
Biodiesel
Hay Conditioner
Xylene
Treflan Herbicide
Roundup Herbicide
Atrazine Herbicide
Headline Fungicide
Cottonquik Defoliant
ISO 16750-5
ISO 16750-5
Diesel fuel
Bio diesel
Gasoline
Methanol
Engine oil
Differential oil
Transmission fluid
Hydraulic fluid
Greases
Silicone oil
Battery fluid
Brake fluid
Antifreeze fluid
Urea
Protective lacquer
Protective lacquer remover
Windscreen washer fluid
Vehicle washing chemicals
Cold cleaning agent
Cleaning solvent
Denatured alcohol
Contact spray
Runway de-icer
Cationic surfactant
Chemical agents
Diesel
Motoröl
Differantial öl
Fett
Bremsflüssigkeit
Harnstoff (Adblue)
Hohlraumschutz
Automative Waschchemikalie
Felgenreiniger
Kaltreiniger
Aceton
Waschbenzin
Kontaktspray
Bremsenreiniger
Dämpferöle
Pentosin
FAM B
FAM A
Grossol Lackfarbe Spray Schwarz
Grossol Lackfarbe Spray Gelb
Grossol Lackfarbe Spray Grün
Loctite 648
Universal Spray-WD 40
Sprühkleber 3M
Korrosionsschutzmittel Kontakt 61
Cool Guard 1:1 in H2O
Protecting Lacquer
Superbenzin (SOK)
Paint Thinner
Düngermittel (10%)
Düngermittel
Rapsöl
Enfetter
2,4 Dichloropheoxyessigsäure
Nitrolösung (14 % NH4NO3, 14% CON2H4)
Ethephon (0,19%)
Reinigungsverdünner
Bio Hy-Gard
JD Hy Gard
Glysantin (Cool Gard)
Biodiesel (FAME)
5% NaCl
Hydraulik Öl (HLP46)
Scheibenwisschmittel
1% Na3PO4
Prüfkraftstoff CRSG E24
Glysantin G48
FAME
Additiv 16
Bodoxin
Hakupur 445
Hakupur 448
Turbinen Öl T46
Lenkungöl
Kerosin
Troyshiel PA 10
Donax TD 5W-30
Motoröl SAE 10W 40
PAG Öl 46
Glasreiniger
Parmetol
Troyshield
Grotanol
L-Histidine monohydrochloride monohydrate
Natriumdihydrogenphosphat Dihydrat
Di-Natriumhydrogenphosphat Dihydrat
Ethylenglykol
U46 D-Fluid
Composan Extra Ethephon
IRM 901 Referenzflüssigkeit
IRM 902 Referenzflüssigkeit
IRM 903 Referenzflüssigkeit
JDQ 53.3
